350z/370z transmission shifter return spring kit Under Bonnet Misc

350z/370z transmission shifter return spring kit Under Bonnet MiscThe GKTECH CD JK transmission spring kit will bring your gear stick back to life by stiffening up the shifter and increasing overall shifter feel. The kit comes with 2 sets of springs to suit your preference. To install simply remove the 2 bolts from the side of the transmission under the shifter assembly and install with your choice of springs. Fits all CD JK transmissions fitted in Z33 350z and Z34 370z's

The GKTECH high tensile 4130 zinc coated offset tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock with the added bonus of moving the tie rod position forward 25mm's which helps reduce steering bind

This kit will allow you to get around 60 degrees of lock lead wheel and with adjustable ackerman you can acheive near parallel front steering

non-Brembo or Akebono calipers for use as a standalone hydraulic handbrake

These inner tie rods are an OEM replacement only

This kit has been designed specifically for the Nissan S and R chassis rear knuckles

the more caster the better

These are an easy DIY direct replacement that shouldn't take longer than 10-15 minutes to install

The rotors included are Slotted for better braking and heat disbursement

preventing extra movement at high RPM

The GKTECH gear shifter cup socket replacements have been designed to replace the OEM unit that becomes sloppy over time

A raised subframe and/or drop knuckles both reduce the amount of negative adjustment available

The GKTECH V2 R32 GT-R Skyline subframe weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most