Wilsonart Brazilwood 7946 Laminate Sheet Product Finish_Chrome

Wilsonart Brazilwood 7946 Laminate Sheet Product Finish_ChromeWhat is High Pressure Laminate (HPL)? HPL is a decorative surface which composes of a resin impregnated kraft paper creating rigidity, a decorative paper to display the design of the laminate, and a clear melamine overlay on top for protection. All of these components are bonded together using high pressure and heat. Once created, the HPL can be bonded to a substrate such as plywood, particle board, or MDF with ease using contact cement adhesive. How

Can be recessed in a 68mm hole with a construction height of only 10mm and can cope with a material thickness up to 3mm

Elm 7966 Laminate Sheet

You can substitute your first coat or two of topcoat with less-expensive Sanding Sealer

Product Characteristics

followed by 2 coats of Black Poly

Formica 6926 Smoky Walnut Woodline Colormatch Recipe is the following:

Formica Colormatch: 299 Ebony Oxide

Formica Colormatch: 5481 Oiled Olivewood

Scuff clean with a Scotch-Brite™ pad or maroon synthetic steel wool & 50:50 mix of denatured alcohol & water

Wilsonart Bannister Oak Laminates can be returned if it qualifies all our return conditions

Can be cut in 19mm increments

Clean the chime of the can thoroughly with a paper towel before closing to create a complete seal