Z33 350z/V35/Z34 370z Polyurethane Diff Bushes feedExclude

Z33 350z/V35/Z34 370z Polyurethane Diff Bushes feedExcludeThe GKTECH polyurethane diff bushes are a direct replacement of the standard items and ensure that movement of the diff is kept to a minimum within the subframe which is quite common under hard driving conditions. Compared to the solid variants that we make, these give a little more give. ShA 90 Polyurethane In this listing we also offer our diff bush remover installer, which makes the job much easier and able to be done on the car, more information

Not very common but if you're running an S13/R32 diff in an R200 subframe (2 bolt cover) you will only need the rear bushes as the front of the diff is already solid mounted

offset rack spacer moving the rack forward to eliminate steering bind on high lock setups

Note - The Gktech hicas lock bar only requires the S13/R32 toe arms which are 40mm wide

1kg)- Provision for ABS sensor Lastly we have

Nissan (for some reason) may have had changed the size on that particular year/variant or over the years your vehicle has had the hubs replaced with a different model and or aftermarket hubs have been installed

The GKTECH lowline hydraulic handbrake assembly is a pull type to be located in front of the shifter (towards the front of the car)

This isn't ideal for those still using their cars on the street with an aftermarket steering wheel

- CNC Laser cut from high strength steel with CNC machined ends

These are required when removing the ball joint from a HICAS equipped knuckle

3mm FY50 Until Aug

The front lines are also longer to compensate for big brake setups or cars with more steering lock (which you would see stretching with the factory line)

due to the system losing pressure