Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

FluoroPel 1601A-FSFluoroPel 1601A FS fluoropolymer solution in a fluorosolvent (BP=160C) for coating glass, plastic and metal surfaces. Thin films dry in a few minutes at room temperature to a surface energy of about 10 dynes cm. Warming to 90C for 10 minutes optimizes adhesion and reduces the surface energy to about 8 dynes cm. 1601A FS is recommended for dip or spin application. On mesh, FluoroPel does not occlude pores and helps achieve oleophobicity grades up to 8.

Approximately 100 square feet of surface area can be coated with 100 grams of CytoCure

butyl acetate

CytoCure has excellent resistance to water-vapor

CytoPel 502LC is a fluoropolymer at 2% concentration in a fluoro-solvent

Thin films cure in 3 minutes at 200°C

TFMA is provided as a solid that is usually ground into a fine powder by a compounder

Static Contact Angle to Mineral Oil (20 µl): >55°

CytoCure DB-glass is a family of hydrophobic and oleophobic glass coatings

if possible under inert nitrogen) to a pencil hardness of greater than #2 at 3 Joules per square centimeter

and other electronic components

oxide-rich

plastic devices