Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

FluoroPel 420UFluoroPel 420U is a 20% concentration fluoroacrylic copolymer solution in MEK for coating membranes, glass and metal surfaces. Thin films dry in a few minutes and bond after a few minutes at 90 C or after 24 hours at room temperature. Surface energy of the cured film depending on the substrate can be as low as 10 dynes cm. Application by dip, spin, spray or dam. 420U repels oils, water, silicones, paints, photoresists and organic solvents when cured.

From thermal management in semiconductor manufacturing to immersion cooling in data centers and solvent cleaning in aerosol formulations

Size 1: 125 ml (Net WT 88 g) (base-coat) + 125 ml (Net WT 1

oil and stain resistance

CytoN 561 has a slightly lower surface energy than CytoN 562

CytoCure is UV-light resistant and lasts 3 to 5 years in extreme sunlight

Apply in well-ventilated area

Static Contact Angle to Mineral Oil (20 µl): >55°

Its' excellent thermal heat transfer and solvent cleaning capabilities make the CytoSol 7100 an effective alternative to 3M Novec 7100 Engineered Fluid

This coating is used in dip coating machines to make laboratory devices such as pipette tips low retention

is recommended for application to oxide rich and conductive surfaces

Oil contact angle: over 65°

Cured films are up to 9H pencil hard

Exchange/Return Notes