Simplex 4098-9776 TrueAlarm Standard Sensor Base SF 05/11

Simplex 4098-9776 TrueAlarm Standard Sensor Base SF 05/11TrueAlarm sensor bases contain integral addressable electronics that constantly monitor the status of the detachable photoelectric or heat sensors. Each sensor's output is digitized and transmitted to the system fire alarm control panel every four seconds. Since TrueAlarm sensors use the same base, different sensor types can be easily interchanged to meet specific location requirements. This feature also allows intentional sensor substitution during

field-selectable settings

multitones or speakers and easily mounts to standard 4” backboxes or for surface mount use with the Wheelock SBL2 surface backbox

strobes and horn/strobes using only two wires in instances where a synchronized flash is required

Edwards WG4WN-SVMA Speaker Strobe appliances are among the most versatile emergency appliances of their kind

The SLICprovides one Class A or Class B data circuit (loop) for connecting Signature Series detectors and modules

• D340 Two-wire Duct Detector Housing (12 VDC or 24 VDC)

providing a clear visual indication

Maximum Working Pressure: 175 PSI

With the adjustable sensitivity

the 9th button on the RPU can be used to acti- vate an MMF-300 monitor module that may be installed inside the ECC-RPU cabinet to be used for applications such as HVAC shutdown

It provides current analog values

The second address is automatically assigned one number higher that the value set on the rotary switches