56332 Yellow lorry marking contour tape 55mmx12.5m (rigid vehicle) (55mm x 12.5M) Safety Sign

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

56332 Yellow lorry marking contour tape 55mmx12.5m (rigid vehicle) (55mm x 12.5M) Safety SignFrom July 2011 contour marking is compulsory for new types models of trucks (for which the manufacturer requests approval) with a maximum tonnage over 7. 5 tons and for trailers with a tonnage of more than 3. 5 tons. The full rear contour must be marked if the vehicle is broader than 2. 1 m. Marking is possible in the colours red and yellow. At least one line covering 80% of the total length must be applied to the lower side of the vehicle. If the

Application only required once or twice a shift

Colourless and non-marking

Containers used for this material may be hazardous even when empty as they retain vapor and liquid residues

Visually inspect and ring all wheels for possible damage before mounting

Supplied in sets of 2panels Each panel 1100mm high x 660mm wide x 40mm thick

Material: Quick-Fix with SAV Backing

Scaffold register should note defects and corrective actions taken

Non-silicone - can be used with products that require finishing

Properly control the risks from fragile surfaces

In situations where risks cannot be controlled by other means such as safe systems of work or engineering controls

Under the Carriage of Dangerous Goods by Road Regulations 1996

Wash skin immediately and over a sustained 15 minute period with plenty of water