Flashforge Creator 3 Pro Complete Hotend Left/Right Size:Right

Flashforge Creator 3 Pro Complete Hotend Left/Right Size:RightIncludes: Heater (1 pcs) Thermocouple (1 pcs) Heat break with PTFE tube (1pcs) Heater block (1 pcs) Heatsink (1 pcs) 0. 40mm nozzle (1 pcs) M3x8 socket head cap screws (2 pcs) Fits: Creator 3 Pro (Does not fit Creator 3)

How does this work

Filament run out Extruder skipping steps Nozzle starting to jam (causing skipped steps or grinding) Filament beginning to grind in the extruder

it is recommended that you set your bed temperature to approximately 55°C-60°C

Allows mounting in many different ways

high strength

as the connector may differ between the X1 Series version and the P1P version

Made using High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber)

- "Filament guide" for a Bowden Tube style configuration where the filament entering from side B and fed into a Boden tube connected at side A

Extruder Temp : 220-240°C

It can be cleaned for tens of seconds to one minute

How cool is that

Designed to weather the fiercest heat - accurately measures up to 450°C