Motorized Changeover Switch ATYS 4P 250A Industrial Automation and Control

Motorized Changeover Switch ATYS 4P 250A Industrial Automation and ControlATyS r are 3 or 4 pole remotely operated motorised transfer switches with positive break indication. They enable the on load transfer of two three phase power supplies via remote volt free contacts, from either an external automatic controller, using pulse logic, or a switch. They are intended for use in low voltage power systems where interruption of the load supply is acceptable during transfer. More Product Details

10M_ -200G_:±(10

The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 400VAC conforming to EN/IEC 60898-1 standard

Output_Voltage : 12VDC

Cu50_Sampling cycle : 100ms

It provides with 380V 50/60 Hz coil

On-delay setting range 1-30s

It provides a 24V DC control circuit with no inrush consumption and equipped with a surge suppression device

with 6mm width

Light meter suit for plants

start-stop control guaranteed for 3600 cycles/hour

It provides a thermal-magnetic protection with a thermal setting range 0

It provides a 24V DC coil with transient suppressor module