Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Orange Silica Gel DesiccantReplacement desiccant for air dryers, 3D Printer Filament and compressors. Indicating Orange silica gel will change to Dark Green when 50 60% absorbed with moisture; Still almost half more capacity is left to absorb moisture even after color change; Orange Silica Gels are free of cobalt chloride Silica Gel can be Reactivated by Placing in the Oven for 0. 5 to 2 hours at 200 to 250F Or Microwave for 10 Minutes at Defrost Mode; Don't use over 250F in

custom artwork

making the entire filament change process fully automatic — no need to manually load each filament into the toolhead

Elegant Matte Finish

Tested with ABS

helping to prevent print failures and improving overall printing efficiency

Fully Automatic Nozzle Offset Calibration

2 mm nozzle is not recommended

Model Link Endless Loop Express

Bambu TPU 90A – With a higher hardness

Motor: One-way motion for 10s

PET-CF PPS-CF Improved % Stiffness (Bending Modulus - XY

Unclogging Pin Tool