Takaab 2XOR - Dual 3-input Logic Exclusive OR Gate

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Takaab 2XOR - Dual 3-input Logic Exclusive OR GateThe 2XOR brings exclusive OR logic processing to the clocks and gates of your eurorack setup. There are two separate 3 input gates, however the top gate (Gate 1) output is normalised to the first input of the bottom gate (Gate 2). This means that with no jack present at Gate 2 In 1, the unit acts as a single 5 input XOR gate with the result at the output of Gate 2 (whilst also having the output of gate 1 available separately). The unit works as a

Like version 1

if you only put a signal to the top input it will cascade down to the next two outputs (pre-fade)

when self patched for example from AC output into CV input can be used to modulate curve to be linear or exponential

With both the push switches out (ON) a voltage applied to the main input will be outputted with any rises or falls in voltage being slowed down dependent on where the A (attack/rise) and R (release/fall) knobs are set to

Approximate frequency ranges:

Building this module requires simple calibration of Saw and Sine waves

it should output approximately the same peak-to-peak level as the original input

Remove any jumpers from the EG-CVX port of the EG module

* Length does not include jack heads

This makes the 3AT a useful tool for sharing a common CV around your system at different levels

Size: 1cm (3HP) x 128

4HP power solution module by Takaab

Exchange/Return Notes